Royal Mat inc. - Manufacturier de produits à base de pneus recyclés
  • Mission
  • Product List
  • To find our products
  • News
  • Careers
  • Contact us


An environmental beachmark Heavy-duty truck mudlaps Rubber Crumb Quality recycled products Royal Mat 30 years
Dairy Residential Industrial
Equine Sport Transport


TECHNICAL SPECIFICATIONS


YOU MAY DOWNLOAD OUR TECHNICAL DATA SHEET IN PDFYou may download the technical data sheet in pdf

 
 
 

 

 
 
 
 
   
Material                                    Recycled rubber crumbs (tires)
Products Min. Max.
Acetone Extract 10.0% 19.0%
Ash content - 8.0%
Carbon black content 28.0% 39.0%
Moisture content - 0.75%
Rubber hydrocarbon 42.0% -
Free fabric content - 0.75%
Free Iron content   0.02%
Bulk density (typical) 100 GM/210 cc
   
  • Colour
  • Inflammability
  • Expansion
  • Width
  • Length
  • Thickness
  • Manufacturing process
  • Black
  • C.P.S.C. FF 170
  • 8.3 x 10-5 in/in F°
  • 1.22 m or 4 feet
  • 1.83 m or 6 feet
  • 1.2 cm, 1.8 cm or 1/2", 3/4"
  • Pressure mould with continuous baking in monolayer.
 
Models

The models available are either plain or hexagon shape (beehive). Underneath the mat there are longitudinal grooves spaced at 18 mm (3/4") to allow air circulation, 6.3 mm (1/4") wide x 3.5 mm (1/8") depth. On special request, Royal Mat can provide its customers with groove less mats, bevelled edge(s), interlocked edge(s) or mats cut to requested sizes.

The mats are made of recycled rubber crumbs, originating from various products not specifically known, can result in slight variations in dimension of the finished product. This mat is designed to be used as a floor covering and should not be altered for other uses.

Installation

Floor preparation: The surface that will receive the Royal Mat's mat has to be dry, clean, smooth, and free of oil stain and any other chemicals. The expansion joint in the floor, the deep splits and the uneven surface must be filled and levelled out with a good quality product. Only the contractor can determine whether or not the surface (area) can adequately covered with the rubber mats. If the area is subject to dense humidity, underground or ground level, a test must be done to establish the degree of humidity contained in the concrete.

Temperature

The Royal Mat mats and the supplies must be maintained at room temperature (15°C or 60°F). Since rubber characteristics very with changes in temperature, it is important that the Royal Mat mats be stored for a period of 24 hours prior to installation in the area to be covered. We recommend the use of our adhesive. After the lay down of the material, it must be rolled with a 35 kg (75 lb.) roller.

Be sure to use the correct cleaning agent, sealer and the finishing product...

Maintenance

Commercial, Industrial, Household uses.
We recommend that you never use alkaline product as cleaning agent. Normal regular cleaning agent used properly will maintain your floor in a good condition with a good looking surface. For more details on other products to be used, for hard to remove stains and to obtain a glossy finish, do not hesitate to call us.

Caution

If more information is required, please do not hesitate to contact the personnel of:
Royal Mat Inc, 132, 181st St., Industrial Park, Beauceville, Qc G5X 2S8 Tel: (418)774-3694 Fax: (418)774-2905.
It will be a pleasure to serve you.




132, 181e rue, Beauceville, Québec CANADA G5X 2S8 Téléphone : 418-774-3694 - Télécopieur: 418-774-2905 - Courriel : info@royalmat.com | Website developped by iClic